| N° | CODE | CONTENU | Qté. |
| 1 | HF2.08.01 | Connecteur broche-barre dia. 8,0 x 5,0 mm | 12 |
| 2 | HF2.08.02 | Connecteur barre-barre dia. 8,0 x 8,0 mm | 12 |
| 3 | HF2.08.05 | Connecteur à 5 trous dia. 8,0 x 5,0 mm | 3 |
| 4 | HF2.08.08 | Tige droite dia. 8,0 mm | 2 |
| 5 | HF2.08.07 | Tige 30 degrés dia. 8,0 mm | 4 |
| 6 | TEF1292P | Broche de Schanz auto-taraudeuse (HF2) | |
| TEF1292P.05.180 | Dia. 5,0 x 180 mm | 4 |
| TEF1292P.05.150 | Dia. 5,0 x 150 mm | 8 |
| TEF1292P.05.130 | Dia. 5,0 x 130 mm | 4 |
| TEF1292P.05.120 | Dia. 5,0 x 120 mm | 4 |
| 7 | HF2.08.18 | Guides dia. 5,0 mm | 1 |
| 8 | TEF1292J | Barre de connexion (fibre de carbone) | |
| TEF1292J.350 | Dia. 8,0 x 350 mm | 2 |
| TEF1292J.300 | Dia. 8,0 x 300 mm | 2 |
| TEF1292J.250 | Dia. 8,0 x 250 mm | 4 |
| TEF1292J.200 | Dia. 8,0 x 200 mm | 4 |
| 9 | HF2.08.09 | Barre de connexion courbe semi-circulaire | |
| HF2.08.09.160 | Dia. 8,0 x 160 mm | 1 |
| HF2.08.09.200 | Dia. 8,0 x 200 mm | 1 |
| 10 | HF2.08.16 | Clé en T | 1 |
| 11 | HF2.08.14 | Clé de stabilisation / réduction | 1 |
| 12 | HF2.08.13 | Clé dynamométrique | 1 |
| 13 | HF2.08.15 | Perceuse manuelle dia. 5,0 mm | 1 |
| 14 | HF2.08.17 | Tournevis dia. 5,0 mm | 1 |
| 15 | HF2.08.19 | Molette | 1 |
| 16 | HF2.08.GC | Boîte à instruments - HF2 grand fragment | 1 |
